Serving Clients Throughout Southern California, Mexico, and Arizona
Fume Control
Airflow Systems model Pac 91 configured for portable fume control with refillable carbon modules in an electronics plant.
Paint and Gas Control
Aircraft plant required particulate control with pleated glass bag and HEPA filters for a known carcinogen.
Paint and Gas Control
Gas adsorption was required also to keep in compliance with local air board.
VOC Adsorption
Gas Adsorption carbon vats adsorb VOC’s from this painting application.Gas Adsorption carbon vats adsorb VOC’s from this painting application.
Carbon Regeneration System
(need to show a picture of the entire system, which is picture large 32 cartridge duct collector with V bank module.)
Carbon Regeneration System
Erthos Carbon Regenerative system
Carbon Regeneration System
large regenerative carbon module for high temp steam regenerative system
Fume Control
Polyester Resin Fume Control
Fume Control
Polyester Resin Fume Control
Fume Control
Sulfur Odor Control for Sanitation Sewage/Effluent Fumes
Fume Control
Custom back draft hoods for VOC fume control application.
Fume Control
Airflow Systems model 240 collector configured with V-bank modules for VOC adsorption.
Lab VOC Control
This is a V-bank module for use on a large dental lab.
Paint Booths
Integrated filtration system with high efficiency recirculation system designed for lower energy consumption.
Erthos Units
Steam Regenerative V Bank Carbon Adsorption Units.
Erthos Units
Multiple V Banks require only one regeneration, providing significant savings in capital costs.
Erthos Units
These units are very efficient and can typically sustain a burn with very little gas consumption.
Jewelry Buffing/Manufacturing
GS-16 intigrated hepa filter and carbon absorption filter, for recirculation for plant conditioned air.
When it comes to Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) like sulfuric gases, fumes, odors and vapors, we’re the authority on eradication.
VOCs and HAPs pose a threat to the environment, local ecosystems and human health. They result in everything from acid rain, to smog, carbon emissions and overall climate change. AAir Purification Systems has made it our mission to curb these negative impacts by outfitting facilities with the highest-caliber gas and odor absorption equipment.
Gas
Our gas absorption equipment is tailored around capturing and neutralizing dangerous gasses produced in your facilities. We ensure gas control systems align with OSHA indoor air quality standards, as well as local municipal codes and regulations. We rely on the likes of activated carbon and permanganate filters to neutralize harmful gasses.
VOCs
Any VOCs dispersed as the result of your facilities’ operations are factored into our purification system design. From aerosol dispersals to paint spraying applications and beyond, our systems contain VOCs before they become a detriment to the environment.
Carbon regeneration:
For large-scale VOC mitigation demands, we can deploy high-capacity, multi-stage filtration units. Ethos stacks and other high-temp steam regenerative systems are extremely efficient and require very little maintenance, while providing ongoing protection against air pollutants.
Fumes
We address the demand for fume control with source capture equipment spanning numerous levels of filtration. Examples include refillable carbon modules for portable fume control in an electronics plant or pleated glass filters for carcinogen control in an aerospace manufacturing plant.
If VOCs are the primary concern at your facilities, contact AAir Purification Systems to begin designing a turnkey solution for dealing with them. We’ll survey the scope of demand in your facilities and provide filtration products specific to the gasses and odors you’re dealing with.
AAir Purification Systems has facilities located in San Diego, CA, along with Tijuana and Phoenix, with the personnel and crews to serve Southern California, Mexico, and the state of Arizona! Contact us today!